There are quite a few times when most of us are stranded on the road with a flat tyre. Not knowing how to change a tyre can be pretty difficult. It’s something which is pretty simple and can be learned with ease so that you are never left alone and stranded when having to deal with a flat tyre.
- Keep the following steps in mind when it comes to changing a car tyre
- Always change the car tyres on a flat and stable surface. If you are on an uneven road, it may be difficult to change the tyre with ease, so make sure you park your car where you might find it easier.
- If you find yourself stranded on a busy road, it would be wise to move your car out of the way of the traffic.
- In case it’s too dark on the road remember to turn on your emergency flash lights.
- Apply the brake on your car and put it in a parking position. If it’s a standard transmission you would need to move the gear into first or reverse.
- Place a pair of bricks or any other heavy object in the front and back of the back tyres.
- Now get your hands on the jack and the spare tyre
- Put the jack under the frame of car and in position with the tyre which you want to change.
- Most modern car have a mark or a position which indicates where actually the jack needs to be placed.
- The jack should ten be raised until it is properly supporting the car make sure that it’s merely supporting and not actually lifting the car.
- It should be directly perpendicular to the ground.
If you find yourself in need for emergency tyre replacement or repair, ensure you remember these mobile tyre fitters and bookmark this page, in case of an emergency.
- Make sure to remove the hub cap and the nuts properly by using counter clockwise directions. There’s no need to completely take of the nuts, you simply need to remove the resistance. Make sure the tyre is on the ground so that you know that you are simply turning the nuts and not the wheel itself.
- Make sure you are using the correct wrench which came with your car. The wrench would sli with ease over the nuts and won’t make a rattling sound.
- Breaking the lug nuts would require a great deal of effort. Be prepared to sue your body weight to do so if necessary.
- You would need to pump the jack to lift he tyre of the ground so you could replace it easily with the spare one.
- Make sure you use the counter clockwise movements to ensure the stability of your car during the wheel changing process.
- Once you remove the tyre, immediately replace it with the spare one. Often enough the rust might cause the tyre to stick and make it difficult to come off, in any case be prepared to apply a little extra force to get the job done.
- Once the tyre is replaced its time to put back the nuts and ensure that they are all snug and well fitted.
- Now lower the car but don’t use too much pressure. Jut ensure that all the nuts are properly fitted
- Last but not the least don’t forget to take your tyre for repairs to the mechanic.
We hope this article was helpful. If instead you would like to hire a car tyre fitting service specialist, ensure you visit the professionals at their site instead.